WoodMaxx WM-8M, Руководство оператора

Страница: 36 / 58

www.WoodMaxx.com
35
MAINTAIN INFEED DRIVE AXLE MAINTAIN INFEED DRIVE AXLE
Fig. 1
Tools you will need:
• 4mm Allen Wrench • Mineral spirits solvent, grease
• Flat Head Screwdriver
• Way oil, heavy viscosity slide way lubricant.
(Chainsaw bar oil works well)
• Detach PTO shaft from chipper.
[Fig. 1]
• Remove in-feed roller disengage bar cable.
[Fig. 2]
• Remove shield that covers axle.
• Remove each side of drive axle. (4mm Allen Wrench)
[Fig. 3]
• Clean drive axle with solvent and a brush.
[Fig. 4]
• Apply liberal amounts of grease to the clutch
assembly.
[Fig. 5]
• Install drive axle.
• Apply a liberal amount of way oil, (chainsaw bar
oil) onto shaft, and universal joint. Be careful not
to get oil on the belts/pulleys. This type of oil has
properties that allows the oil to stick to the metal
and have superior lubrication to prolong the shaft
life, and is ideally suited for this application.
[Fig. 4]
• Reattach shield/cable.
STEPS:
Fig. 2
Fig. 3
Fig. 5 Fig. 4