Woodland Mills WC68, Руководство пользователя

Страница: 16 / 32

OPERATION
INFEED ROLLER CONTROL
The chipper comes standard with an infeed roller speed control valve. Moving the arm
shown in the below pictures will increase or decrease the speed of the roller. The
number “0” represents (left image) no rotation of the infeed roller while number
“10” (right image) represents full speed.
To change the speed of the infeed roller, place the red coloured feed control handle bar
in the neutral position. When this is done, the feed roller should not be rotating. The
speed control valve can now be moved to the desired position.
The infeed roller can be set to three (3) different rotation settings – Forward, Neutral &
Reverse. The forward position will pull branches into the chipper, neutral will stop the
roller from turning and reverse will push branches back out of the chipper towards the
operator. See the below picture for these positions:
Page of 15 30
No Rotation
Full Speed
Neutral
Reverse
Forward