Woodland Mills WC68, Руководство пользователя

Страница: 18 / 32

MAINTENANCE & SERVICE
SHARPENING BLADES
The chipper blades will dull, making chipping difficult and your tractor to labour. It is
recommended to sharpen the chipper blades every 25-50 hours of chipper operation. The
WC68 wood chipper uses four (4) hardened steel blades. The blades are reversible and can
be sharpened on both sides. Follow the below steps to sharpen the blades.
1) If installed, the PTO shaft should be disconnected from the tractor for safety.
2) The upper flywheel housing can be opened to access the blades by using a 24mm
wrench to remove the bolt holding the two halves together.
3) With the flywheel now exposed, rotate it so that there is access to the first blade.
Using a 17mm wrench or socket on the nut and a 6mm allen key on the bolt, remove
the two bolts holding the blade onto the flywheel. Ensure that you do not drop the
nuts or bolts into the bottom of the flywheel housing. If this occurs, a long pen
magnet can be used to retrieve them.
Page of 17 30