WOODCO Nova 2, Техническое руководство, Страница: 17 / 36

17
English
1/04/17 Rev:1.0.0
Tighten the screws in the wall plugs
and check that the bracket is well
anchored to the wall.
3
Hook the vacuum cleaner to the an-
choring bracket by lifting it, leaning it
against the wall and allowing it to slide
down until it fi ts into the fi xing plate.
4
8.5 Connection to the piping network (see also appendix A)
1. Using the sleeve, connect the dust inlet coupling of the vacuum cleaner, identifi ed with (B) in the
picture, to the suction pipe from the piping network.
2. Using the sleeve, connect the venting air coupling of the central vacuum cleaner, identifi ed with (C),
3. Place the silencer on the air discharge pipe.
C
B
Do not glue the pipe end of the network pipe to the dust inlet coupling or to the air exhaust coupling,
always use the sleeves provided. In case of air expulsion to the outside, please follow the
instructions below:
Discharge pipe Max length 5 meters
SEE APPENDIX FOR COMPLETE USES OF VACUUM UNITS WITH AUTOMATIC FEED SYSTEM
FOR BOILERS WITH SOLID FUELS AND RELATED WARNINGS.