An ongoing program of product improvement may require us to change
specifications without notice.
WS-MS-(4, 5, 6, 7)-W-IR,
Revised May 2015. Doc no: M0036.04
27
Mountain Series
Installation and Operation Manual
or visit
woodstone-corp.com
Wood Stone Corporation
1801 W. Bakerview Rd.
Bellingham, WA 98226 USA
Toll Free 800.988.8103
Tel 360.650.1111
Fax 360.650.1166
MANTLE MOUNTING
The initial steps are the same for mounting either a stainless mantle or a bracket for a granite mantle�
INSTALLATION OF GRANITE
After completing the steps outlined above, apply a generous amount of silicone adhesive (provided) to the top of the
steel mantle bracket�
Put the stone in place and apply light
pressure to seat it properly� Make sure
that the angle in the granite lines up with
the angle in the bracket� Allow the sealant
to set for several hours before filling
any gap between the stone slab and the
metal bracket with the silicone sealant
(provided)� Clean up any sealant before
it dries�
1.
Begin by installing the threaded studs
into the clip nuts below the oven
doorway (3 or 4 turns is sufficient)�
2.
Position the mantle (or bracket) on the
oven, making sure the rear flange rests
on the floor of the oven (you may need
an extra pair of hands)�
3.
Place one stainless steel washer and a
cap nut onto each stud� Tighten the cap
nuts so the mantle is securely held in
place�
4.
Using the high temperature silicone
(provided), fill any gaps between the
oven hearth and the mantle flange�
Gaps between the mantle flange and
the stainless steel doorway frame
may also need to be filled with a small
amount of the silicone sealant� Clean
up any sealant before it dries�
Содержание MT. ADAMS WS-MS-5-W-IR
Страница 43: ......