Maintenance & Alignment
Alignment
3
3-7
PGdoc031914
Maintenance & Alignment
See Figure 3-6.
Before tightening the clamp mounting bolts, check the position of the
clamp rollers in relation to the wear pad. Be sure the rollers are not centered directly in
front of the edge of the pad. This could cause a kink in the blade when clamped.
To adjust the horizontal position of the clamp rollers, tap the clamp assembly to move the
rollers toward the index arm. Be sure the index arm will not contact the rollers in its most
forward position. Tighten the clamp mounting bolts.
FIG. 3-6
NO
NO
YES
PG0005-14
