Setup & Operation
Operation
2
2-13
PGdoc031914
Setup & Operation
See Table 2-1.
The quantity of teeth on any particular blade depends on the length and
tooth spacing of the blade. Common blade tooth quantities are provided below.
Once a valid tooth quantity is entered, the control will display “Press Start to Begin Setup”.
Press the green START button to activate the grinding wheel and cam index motors. Turn
the feed rate up to grind a tooth. Turn the feed rate knob to zero (0) and check the grind of
tooth.
NOTE:
A bottle of red dye is supplied. Brush the several
tooth profiles with die before grinding. This will assist you in
seeing how the grinding wheel is contacting the tooth so
you can make the appropriate adjustments.
See Figure 2-12.
Check the grind of the tooth. The grinding wheel should lightly contact
the tooth evenly across the face, gullet and back of next tooth.
Tooth Spacing
0.656”
0.875”
1.125”
Blade
Leng
th
144”
220
165
128
158”
241
180
140
178”
272
203
200
184”
280
210
163
205”
312
234
182
No. of Teeth
TABLE 2-1
FIG. 2-12
Properly
Indexed
Indexed
Too Short
Indexed
Too Far
PG0008
