Wood-mizer LT35, Инструкция по безопасности, установке, эксплуатации и техническому обслуживанию

Страница: 42 / 134

Sawmill Operation
Loading, Turning And Clamping Logs
4
4-5 WMdoc072619 Sawmill Operation
1. Use cant hooks or the optional manual log turner to rotate the log on the sawmill bed. See
Log Turner Manual .
2. Spin the log against the side supports until it is turned the way you want it for the first cut.
Optional Hydraulic Log Turner:
1. Engage the log turner arm. Let the arm rise until it touches the log and starts to turn it.
2. Spin the log against the side supports until it is turned the way you want it for the first cut.
3. To turn the log more, clamp the log against the side supports and lower the turner arm
below the log.
4. Raise the turner arm to get a new bite on the log.
5. Disengage the clamp and continue turning the log.
6. Repeat steps 3 through 5 until the log is turned as desired.
TO CLAMP LOGS
1. Position the log clamp in the bracket in the hole closest to the log.
2. Move the clamp down far enough so that it is below your first few cuts. Pivot the clamp so
that it moves the log firmly against the side supports. Lock the clamp in position with the
locking chain.
See Figure 4-4.
FIG. 4-4