Safety
Safety Instructions
Safety
TL04doc081916
2-7
2
Restoring Equipment to Service
1.
When the job is complete and the Tailer is ready for testing or normal service, check the
Tailer area to see that no one is exposed.
2.
When the Tailer is all clear, remove all locks. The energy isolating devices may be oper-
ated to restore energy to the Tailer.
Procedure Involving More Than One Person
In the preceding steps, if more than one individual is required to lock out the Tailer, each
shall place his own personal lock on the energy isolating devices.
Rules for Using Lockout Procedure
The Tailer shall be locked out to protect against accidental or inadvertent operation when
such operation could cause injury to personnel. Do not attempt to operate any switch or
valve bearing a lock.
Owner’s Responsibility
The procedures listed in this manual may not include all ANSI, OSHA, or locally required
safety procedures. It is the owner/operator’s responsibility and not AWMV Products to
ensure all operators are properly trained and informed of all safety protocols.
Owner/Operators are responsible for following all safety procedures when operating and
performing maintenance to the Tailer.