Wonderfire Lincoln BR517S, Руководство по установке

Страница: 20 / 32

20
11. INSTALLING THE CAST IRON FIREFRONT
9.1 Warning! The Lincoln front is
cast iron weighing around 20kg
(44lbs). To avoid any risk of injury, if
you have any doubt of your ability to
easily lift this front ask someone to
assist you.
Having assistance when
installing this front will also reduce the risk
if damaging the front or anything nearby.
We suggest that parts of the cardboard
packaging, or similar, is used to protect the
hearth and fireplace surround.
9.2 The front has a location plate at
the rear of the mantle shelf and a lug at the
rear of each vertical column. These locate
into the convection box. Carefully lift the
cast front into position square with the
convection box taking care not to damage
the slide control mechanism.
Holding the cast front a little above the top
surface of the convection box, locate the
two lugs into the lower case support brackets and the upper location plate into
the two slots in the upper case front support. Gently lower the cast front onto
the hearth making sure that it causes no damage to the hearth or fireplace
surround. The cast front should sit squarely on the hearth and against the
vertical surface of the fireplace. See figure 34.
Note:
If the gas supply is across the hearth, make sure that the supply pipe
is located through the purpose provided slot in the front casting – See figure
35.
Fig. 35 Side supply pipe entry
Fig. 34 Lincoln front installation