1 Preface
FWL-PushPull-30 (TwinUnit)
7100904 | 202202
WOLF GmbH | 31
1 Preface
These installation instructions contain important
information about final installation of the slide-in
modules and internal covers. Final installation
takes place once the plastering and paint work is
complete.
Observe the attached safety instruction
sheet.
In combination with the
FWL-PushPull RLS-K
control, you can use the commissioning software.
For information on the installation of
the wall sleeve and external installa-
tions → FWL-PushPull-45 / FWL-
PushPull-30 shell installation instruc-
tions.
For information on the installation
and commissioning with a large vari-
ety of setting options and information
on connection options to the bus sys-
tem or to the 230 V input
→ FWL-
PushPull-45 / FWL-PushPull-30 in-
stallation and commissioning instruc-
tions.
To download the commissioning soft-
ware →
www.wolf.eu/software/push-
pull-inbetriebnahme
For information on operation and
making unit settings via the service
mode → FWL-PushPull-45 / FWL-
PushPull-30 operating instructions.
For information on filter changes, set-
ting the operating modes and ventila-
tion levels → Brief instructions on fil-
ter changes, operating modes, ventil-
ation levels.
For accessory components → Supplement for
accessory components.
2 Safety
• Read
these instructions
and the
enclosed
safety instructions
carefully before installa-
tion.
• Follow the instructions.
• Pass these instructions on to the owner/operat-
ing company for safekeeping.
3 Scope of delivery
Scope of delivery depends on system con-
figuration.
FWL-PushPull-30 (TwinUnit)
ventilation unit
● Internal cover, complete: Housing, 2x G3 air fil-
ter and front cover.
● Slide-in module including 2 fan units and 2
ceramic heat exchangers.
● 1 extension duct, 200 mm long; 1 centring ring;
2 sealing strips.
● 1 internal housing drilling template.
● These installation instructions.
FWL-PushPull-30 RC (TwinUnit)
ventilation
unit
● Internal cover, complete: Housing, 2x G3 air fil-
ter and front cover.
● Slide-in module including 2 fan units and 2
ceramic heat exchangers.
● 1 extension duct, 200 mm long; 1 centring ring;
2 sealing strips.
● 1 internal housing drilling template.
● These installation instructions.
4 Intended use
FWL-PushPull-30 (TwinUnit)
ventilation units
with heat recovery are used for air ventilation and
air extraction of apartments, offices and similar
rooms. They are suitable for new buildings as well
as renovation work. The units are designed for
24h operation. The housing unit’s ventilation sys-
tem should be configured in accordance with DIN
1946-6.
FWL-PushPull-30 (TwinUnit)
are balanced vent-
ilation units, which are the ideal choice for use in
exhaust air rooms
(bathroom, WC or kitchen
with windows
) and
ventilate and extract air
from the rooms at the same time. Exhaust air
mode is started automatically depending on the
setting or can be started manually at the touch of
a button.
FWL-PushPull-30 (TwinUnit)
are stand-alone
units or can be used in groups with other
FWL-
PushPull-30 (TwinUnit)
/
FWL-PushPull-45
units.
Содержание FWL-PushPull RLS
Страница 63: ...Notizen...
