Wolf Garten LI-ION POWER GT 815, Инструкция по эксплуатации

Страница: 16 / 40

16
Problem Possible cause Remedy
Tilt switch is not
working.
• Spool is empty. Fit new spool.
• Dirt and debris in spool drive
mechanism.
Clean parts with a brush.
• Line is torn and stuck inside
spool.
Remove spool, check tightness of
winding and replace spool in the
usual way.
• Line is „welded“ to itself or to
spool through heat build-up.
Remove welded line section, check
tightness of winding and replace
spool in the usual way.
String breaks too
frequently
• Coil too dry or brittle.
Place the coil in a container with
water for approx. 24 hours. Dry
and reinstall it.
• String in contact with fence
posts, trees, etc.
Use plant guard.
When in doubt, always consult a WOLF service workshop.
1
Switch off the trimmer and disconnect the battery before inspecting, cleaning or
working on the thread.
Faults and how to remedy
Spare parts
Supplied by your dealer.
Ordering Number Designation of the item Description of the item
7117 081 RQ-FA
Cord spool
7130 102
Plant hoop guard
7420 096 LI-ION POWER Pack 3 Battery
7420 061 Charger (standard)