Operation
35
Operation
NOTICE
When changing the pallet using lifting equipment or a robot,
ensure that the pallet is lifted exactly parallel to the modules.
The inclination (X) during lifting may not exceed 1.2°.
If the inclination is larger, the clamping pins can jam and the
system components could be damaged or destroyed. In this
case, the system must be inspected and damaged parts must be
replaced immediately.
Only original WNT spare parts may be used.
WARNING
Risk of injury due to losing pallets or workpieces in the case of
incorrect actuation caused by incorrect operation.
Risk of injury due to compressed air hoses coming loose when
connected improperly.
• Disconnect the energy supply after locking.
• Use check valves or safety switches.
• The danger zone must be surrounded by a protective
enclosure during operation.
WARNING
Risk of injury due to losing pallets or workpieces if the supply
of compressed air drops or fails, and due to the clamping pins
immediately closing
• Do not reach into the clamping module.
• Use pressure maintenance valves.
• Use loading devices.
5
Содержание 80 809 070
