WNT 80 809 070, Сборка и руководство по эксплуатации

Страница: 62 / 84

Assembly
20
Ventilation methods
Turbo connection
When the turbo connection is used (if available), the spring-
actuated locking procedure is actively supported with air pressure.
If the turbo connection is not used, the relevant side of the piston
must be able to ventilate.
Connecting hose lines
If several units are activated via shared hose lines, feed lines with
the following minimum cross-sections must be used.
Number of modules Minimum nominal hose width
1 4 mm
2, 3, 4 6 mm
5 8 mm
When disconnecting hose lines, the relevant openings must be
secured with seal plugs to prevent ingress of dirt or cooling
lubricant.
Pulling off thread
Detaching threads facilitate (if available) the removal of the
modules from the modules for stationary use / application.