WMF combiNation S/S4/ESeries 8600 Скачать руководство пользователя страница 67

Страница: 67 / 75

146

10.2

Forced intermediate cleaning of the combination spout (or chocolate dispenser)

Important!

For hygiene reasons, all surfaces which come
into contact with milk must be thoroughly
cleaned at least once a day. In addition, the milk
intake hose

should be replaced at regular in-

tervals.

The machine is ready for operation and the adjacent display
is shown:

Press the

soft key to enter the Selection menu on the

next level, where the Cleaning function is available.

If access authorisations (PIN numbers) have been allocated
(see chapter 8.5, page 124), a request for your PIN number
appears on pressing the

soft key. Key in your PIN

number. When the correct PIN number is keyed in, the
Selection menu will open.

To alter your machine settings, press the

soft key in

the Selection menu.

In the menu that appears next, you are asked to choose
whether you wish to alter the beverage settings, machine
settings, reset, timer program, date/time or the contrast.
Choose the

Machine

soft key.

This menu allows you to choose to set up the display lan-
guage

Language

German / English / other language, forced

cleaning

Cleaning

of the combination spout or the mode

OperatingMod

as normal or self-service mode.

Press the

Cleaning

soft key to activate forced cleaning.

The next step is to set up forced cleaning of the foamer or
forced cleaning of the chocolate dispenser. Press the

Foamer

IntClean

Choco Int.Clean

soft key in the display, as ap-

propriate.

Содержание combiNation S/S4/ESeries 8600












































































Результаты поиска

Содержание combiNation S/S4/ESeries 8600

Отзывы:

WMF combiNation S/S4/ESeries 8600, Руководство по эксплуатации, Страница: 67 / 75

Результаты поиска

Содержание combiNation S/S4/ESeries 8600

Отзывы: