WMF combiNation S/S4/ESeries 8600, Руководство по эксплуатации, Страница: 13 / 75

92
To fill the ground coffee hopper 2 remove the hopper lid
and fill the hopper with ground coffee. Then replace the lid
to close the hopper. The ground coffee hopper
2 has a ca-
pacity of approx. 500 g.
It is important to top up the coffee beans hopper and the
ground coffee hopper before they are completely empty to
ensure correct operation of the coffee machine.
7.3 Preparing to dispense milk
In order to dispense milk from the machine, the milk tank
supplied (e. g. in the WMF auxiliary cooler or, as shown
here, the Tetra Pak) has to be connected to the combination
spout
7 of the machine by the milk intake hose 16 .
If this is not the case, proceed as follows.
Slide the complete front door 14 upwards until the clamp-
ing valve 13 is easily accessible. Do this by grasping the
front door at both sides and sliding the front door upwards
with gentle pressure (see also chapter 7.5 on page 95).
The milk intake hose 16 has a plastic connector on one end
(bottom left in the picture) and a metal nozzle on the other
end (top right in the picture).
2
16
7
14
13
16