WMF combiNation S/S4/ESeries 8600, Руководство по эксплуатации, Страница: 42 / 75

121
In the example shown here, the sequence selected was cof-
fee
Coffee
, froth
Foam
and finally milk
Milk
. By pressing the
Test
soft key at any time during setting, you can activate a
test brew to check the result of the changes you have made
to the settings. Press the soft key to accept the new set-
tings, or press to quit the settings menu without accept-
ing the changes.
8.2.8 Beverage selection (acceptance of factory settings)
To set or alter which beverage is allocated to a beverage
key on the control panel, enter the beverage settings menu
(see chapter 8.2 on page 115) choose the setting mode for
the beverage selected and use the
and/or soft keys to
scroll to the setting page where the
Beverage
soft key ap-
pears. Then press the
Beverage
soft key.
The following display appears. This list contains around 40
standard beverage settings which you can allocate to the
individual beverage keys. By using the
and/or arrow
keys you can scroll one page forward or back through the
list until you find the beverage you are looking for.
Important!
When you alter the beverage selection, the individ-
ual settings are overwritten by the default values for
the beverage selected (factory settings).
If you only want to alter the settings for a beverage
key which has already been allocated, skip this set-
ting step.
If you want to allocate a new beverage to a beverage key
on the control panel, press the name of your desired bever-
age on the list soft key.
In the example shown here, the beverage selected was
Latte Macchiato. Press the soft key to accept the new
settings, or press to quit the setting menu without ac-
cepting the changes.