There at the Global Settings part, you can configure the
Mount and Swap areas.
The Mounted file systems are listed the connected and mounted devices (such as uSD card,
connected USB pendrives, hard disks, USB and internal Flash). These file systems will be attached
under the
/mnt directory in SSH.
Certainly, only the formatted and partitioned filesystems can be seen here.
Here you can
the settings of a device (media) or
a device from the list. You
can also
new mount points here.
At the bottom of the screen you can define SWAP area for the system. It is suitable for temporary
files and speed-up the file-system handling. This can be necessary when you are using a massive
amount of memory and for some 3rd party applications.
When you have changed the configuration, push to the
Save & Apply
button.
6.7 Statistics
6.7.1 View the statistics reports
In the Statistics menu / Graphs menu item, you can see the current and archive statistic graphs
of the router perfomance.
Choose a tab (
Processor
,
Interface
,
System Load
,
Memory
) to check the stored QoS /resource
statistics.
