You can configure similar settings for the RS232 port also.
When you modified the settings, save them by the
Save & Apply
button.
Attention! Take consider, when you are attempted to change any of the Port numbers, then after
saving your settings, you need to allow these ports at the Firewall settings (see chapter 5.9)!
The RS232/RS485 port (RJ12 connector) pinout can be seen here.
Take care on grounding when using the connection
with external devices.
You can order from us an RJ12 connection special
cable with the matching pinout to interconnect your
external devices to the router.
4.6 Voice Call Config
At the Network / Voice Call Config menu item it is possible to setup commands you are
attempting remote control commands.
These are provided by remote administration and management purposes of the router in case of
necessary. For answering an incoming call from the validated phone number(s), the router will be
executing a pre-defined command, which can be:
-
Reboot (of the router)
-
Modem hard reset (restart the modem)
-
Modem soft reset (quickly reinitializing the
modem)
You can
more phone numbers and select from the pre-defined commands to execute.
