example. Use the Network / Interfaces menu,
WAN
interface,
Edit button and Service
Type field.
The available APN settings will be assured by the SIM card provider mobile operator or
your mobile internet service provider. Ask them about APN, password, SIM PIN and further
necessary information. You can configure these in the Network / Modem settings menu.
When configuring the SIM or APN settings, after the saving the router, it will not restart the
modem automatically with the new settings. You need to restart the modem by the
Restart
WAN
button in the OpenWrt
®
menu at Network / Modem settings.
In case of network outage, the wireless and cabled network connections, sessions will be
reconnected soon, data will be received and transmitted automatically (by the settings) as
the power source was estabilished. RS232, RS485 data will be received automatically again.
You can configure RS485 data speed rate betweeen 300 baud and 115 200 baud, but pls.
consider that max. 19 200 baud is guaranteed to receive. We offer to use 9 600 or 19 200
bps (as they are standards also), because some connected systems can cause loss of
characters/data in higher data transmitting speed rage.
If you want to use the router without the wireless option, as cabled Ethernet router with
RS485 extension, you can do it, by removing the
WAN
interface by the
Delete button from
the Network / Interfaces menu.
The router has service modes by its Reset button – for stop, restart and applying the
default configuration. You will found further information in the
Installation Guide
document.
