will be lighting and the current SIGNAL LEVEL leds will be also lighting its signal strength
value which means connected and you have useful wireless signal reception for the usage
and data transmitting.
g.)
If you have already connected the USBLAN or LAN1..LAN4 or the RS232/RS485, the
interface connectivity led will be also active and signing the network connection and data
traffic.
When the router has reached the listed point „e.)” then the device is already accessible on its LAN
and USBLAN interfaces, therefore now you can login to the LuCi
®
web user interface (or connect
via SSH).
2.3
Local access via Ethernet port (LAN1..LAN4 interfaces)
The router’s default Ethernet IP address is 192.168.1.1
Add the 192.168.1.x IPv4 address (where x can be between 2 and 255) to your computer’s
Ethernet interface for connecting to the router.
Then you can access the device through the web user interface or by SSH.
For connecting to the router on web interface use the
Important!
The DHCP service is turned on for the Ethernet interfaces, by default.
The ETH1..ETH4 interfaces are bridged, therefore its not important which port are you currently
using, all network data and TCP/IP packets will be relied.
