The
RS485 port (terminal block connector) pinout can be seen on the upper figure. Use the opposite
part of the connector for wiring (part is included in the product box).
The
DSUB-9 connector (RS232) is a standard serial port, which can be wired 1:1 to an external
device.
Take notice to the wiring the ground to the device when you connect an external device.
1.3
Safety cautions
The device must be used and operated according to the related user manual.
The installation can be carrying out only by a responsible, instructed and skilled person
by the service team, who has enough experience and knowledge about carrying oug the
wiring and installing a router device.
Its prohibited to touch or modify the wiring or the installation by the user. It is prohibited to open
the device enclosure during its operation or under power connection.
10
11
10
– RS485 connector (5-pins terminal block)
–
presented only in case of presence of
RS485 expansion
11
– RS232 connector (DUB-9) – presented only in case of presence of RS232/RS485
expansion
MB+ | MB- | A | B |GND
