You can assign the selected hostnames to the IP address with the
button, then if connected,
the clients will appear in the
Status
/ Overview
menu item on the main page with this name.
If you have modified the settings, save by
Save & Apply
button.
5.6 TFTP settings
Open the
Network
menu,
DHCP and DNS
item.
Here on the
TFTP settings
tab you can enable the TFTP server (
Enable TFTP server
) and enter
additional information about it.
The FTP service can be useful for forwarding the data of connected devices and meters via ftp - to
a server, remote IP address.
To enable the TFTP server, you must enter the following server information:
TFTP server port,
Network boot image.
Of course, you can also use SFTP on your router by sending the data to IP addresses by entering
your account and password information. if you need more help, see Chapter 9 in the OpenSSH Linux
command line settings.
If you have modified the settings, save by
Save & Apply
button.
