For the
Timeout
value, you can specify the amount of timeout (in seconds).
Do not change the value of the
Device
field!
For
Options
, the first member specifies the communication port speed (default: 19200 bps), we
recommend using this or 9600 bps - as the RS485 standard).
The second member specifies the value of
STOPBIT
(can be
1STOPBIT
or
2STOPBIT
).
The third is the value of
DATABITS
, where it can be
7DATABITS
or
8DATABITS
.
You can also specify additional members such as hardware flow control
RTSCTS
, which can be
turned off with the prefix "-". A space must be placed between members.
A beállítások elvégzéséhez nyomja meg a
Save & Apply
gombot.
Attention!
As an exception, you must add the Port numbers specified for each port to the Firewall
rules, otherwise the router will not receive serial port data in
Firewall
settings.
5.8 LED configuration
Open the
System
menu,
LED Configuration
item. Here you can specify the rules for the LEDs for
each LED status.
Use
Name
to add a name for a rule. Under the
LED Name
you can select which
LED status
you
want to set:
•
leg2g
–
LED2
green
light
•
led1r
–
LED1
red
light
•
led2r
–
LED2
red
light
•
led3r
–
LED3
red
light
Only free LEDs that are not reserved are
displayed.
