T
o enable DHCP, uncheck “Ignore interface”. For this, the fields required for DHCP configuration
are displayed, with default values.
The
Start
field means what the starting address should be within the subnet used by the router (in
our case 192.168.x…).
Use the
Limit
field to limit how many IP addresses are assigned. That is, the router on subnet
192.168.x will assign IP addresses in the address range between
Start
and
Start + Limit
to the
devices that want to connect.
Additional settings on the
Advanced Settings
tab, if required (Dynamic DHCP, Subnet Mask (IPv4-
Netmask)). Save the settings with the
Save & Apply
button.
