3. Connect the power output cable to the back of the ECU.
4. Connect the ECU power supply to the surge protector.
5. Connect the DB9 cable to the ECU.
6. Connect the other end of the DB9 cable to the
control panel box on the back of the board.
7. Locate the zip tie and slip it through the plastic
mount attached to the back of the board.
8. Take the excess DB9 cable and loop it around a
couple of times then use the zip tie to attach it to the
plastic mount on the back of the board.
9. The board cable was plugged into the back
of the ECU when we hooked up the gantry
previously.
See “Connecting the Board Cable”
page 11 for more information.
10. The ECU is now connected.
14
Wizard™ International, Inc., 4600 116th St. SW, Mukilteo, WA 98275 888/855-3335 Fax: 425/551-4350 wizardint.com
20-34304-1A GettingStartedManual9000zFrameShop
04/05/19
Wizard™ CMC Model 9000z Hardware and Software Getting Started Guide
