Commissioning
5
Translation of the original operation manual
31
31
•303_208176_1004_en•ski
CAUTION!
In case the spraying pressure has to be changed, the pressure gauges have to be
readjusted as well.
If the pointers (black) of the pressure gauge is not moving at all or only insufficiently,
the system SHOULD NOT be operated at all.
DANGER OF WRONG MIXING RATIOS!!!
➤
Now turn the MANUAL/AUTOMATIC switch (pos. 1.3) to “AUTOMATIC”.
This changeover is absolutely necessary as otherwise the system will not be moni-
tored. The “AUTOMATIC” position ensures optimum monitoring of the equipment and
avoids wrong proportioning.
Result: The complete system is cleaned and filled with spraying material. You
can proceed with normal work.
CAUTION!
If you are not proceeding with coating, you have to clean the area between the mixer
and the spray gun* to prevent hardening due to mixed material (refer to chapter
“pause in work and end of work”).
The material which remains in the system leading up to the mixing block does not
need to be flushed, as no hardening occurs.