11
WT-9002 IP65 User Manual
WT-9002 IP65 – USER MANUAL – Rev.2.0 – Technical Support:
COPYRIGHT ©2010 WITURA CORPORATION SDN BHD
The unit has a rechargeable battery that powers the system for minimum of 8 hours in
the event of a power outage. When the power is restored, it will recharge the battery
automatically whenever the usage capacity fall below 9V.
Note: As the WT-9002 IP65 can only be programmed by the 3 administrator numbers,
you must first program those numbers into the unit. Anytime the administrators want to
access the system, he/she must enter a 6 digit password.
The system is initially set up using a 6 digit password and this is in the format as follows.
*PAWO#123456 (Factory default)
Once turn on the WT-9002 IP65, the system is setup and you shall see the following
When the system is ready to use, you can see the following screen
WT-9002
If the system is working normally, the working indicator will keep on blinking. If it stops
blinking this means the system is busy or freezes, you may want to restart the unit if it
freezes too long.
Settings: >>>>
Search
Wait…
vii) BACKUP
BATTERY
4.
WT-9002 IP65 PROGRAMMING INSTRUCTIONS
4.1 DESCRIPTION
Signal Strength
Indicator
Power Indicator
Battery Indicator
Working Indicator
