20
WT-9002 IP65 User Manual
WT-9002 IP65 – USER MANUAL – Rev.2.0 – Technical Support:
COPYRIGHT ©2010 WITURA CORPORATION SDN BHD
It is possible to program the 1000 phone numbers into the Guest List via Learning Mode.
To do this, you must first supply a 12VDC at Input 1 and turn on the unit as shown
below.
Once turn on the WT-9002 IP65, you shall see the following
Now the system is in learning mode. To program a phone number into the list,
simply call the WT-9002 unit. When the WT-9002 received the incoming call, it
will read the incoming caller ID and automatically program that number into the
list. While in learning mode, you have 120 seconds to program a number. Every
time the number is read and programmed, the timer will be reset. If there is no
programming activity within 120 seconds, the WT-9002 will skip learning mode
and proceed to standby mode.
Settings: >>>>
Search
Wait…
Input guest: 119
4.12 PROGRAMMING THE GUEST LIST VIA LEARNING MODE
Timer
