WITTUR WSG-SF Series, Руководство по эксплуатации

Страница: 34 / 112

Subject to changes without notice ! Änderungen vorbehalten !
Gearless Lift Machine
WSG-SF
Operating Instructions
EN
Code: GM.8.004284.EN
Date: 28. Jan 2020
Version: 0.16
Page: 34
Installation
DANGER
f
Lock the car and the counterweight and ensure that all of the necessary safety precautions are observed for the lift
system. The lift may move in an uncontrolled manner.
f
Ideally, the manual releasing device should be installed without the ropes in place.
f
Install the manual releasing device while the brake is disconnected from the power supply.
1. Install the lever block (1) with two M 12 bolts in a
suitable location in the vicinity of the lift machine.
175
145
91
ca. 420
54
38
13,5
1
2
2. Insert the Bowden cable (2) – the ends with the
spring – into the manual release lever of the
brake (3.)
2
1
3
3. Insert the Bowden cable (2) into the lever block
(1) in position (4). To do this, remove the lever (5).
4. Perform a functional test (at least three times).
1
2
4
5
Information
f
The Bowden cable has to be installed in wide arcs only (bending radius > 0.5 m, if possible). Put no loops !