WITTUR WSG-SF Series, Руководство по эксплуатации

Страница: 27 / 112

Subject to changes without notice ! Änderungen vorbehalten !
Gearless Lift Machine
WSG-SF
Operating Instructions
EN
Code: GM.8.004284.EN
Date: 28. Jan 2020
Version: 0.16
Page: 27
8.6. Replacing the measuring system
Necessary tools
• Torque wrench (1 ... 5 Nm) with Allen key size 2 and 4 mm
• Allen wrench size 8 mm
f
Valid for ECN 1313 and ERN 1387 (Heidenhain).
f
The measuring system is only accessible from the rear side of the motor.
f
See the mounting instructions for the Heidenhain encoder.
f
Disassemble the measuring system only if this is necessary because of a
defect. Remember to readjust the off set value after reassembly (see the
inverter operating instructions).
Brake
Clamping ring
M5- fastening screw
Measuring system
Disassembly
Back-off thread
Loosen
Turn the M10 screw only far
enough in to release the taper shaft.
Assembly