Subject to change without notice!
EN
HYDRA PLUS UD300 CAR DOOR
Code
Version
Code
Version
Date
Page
GM.2.002668.EN
B
3201.32.0397
B
04.02.2013
17.37
centre opening
side opening
min. 3 (D)
min. 3 (D)
min. 1
0
(D)
10. CAR DOOR LOCK
10.1 ASPECTS THAT MUST BE CHECKED DURING INSTALLATION AND MAINTENANCE
-- M
Maaiin
ntteen
naan
nccee h
haass tto
o b
bee d
do
on
nee aatt lleeaasstt o
on
nee ttiim
mee p
peerr yyeeaarr
- The car door lock must lock door if the car is out of unlocking zone. Lock hook must touch buffer.
- All parts of lock coupler, lock notch and additional lock notch (only centre opening) must be securely fixed ((A
A)).
- Safety circuit must be interrupted if the door opens.
- Lock hook and beak overlap when lock is fully closed must be min. 10 mm ((B
B))
- Gap between lock hook and notch should be 1-2 mm ((C
C))
- Contacts should be clean and have minimal wear (metal visible)
- Lock hook and beak overlap when contact operates must be min. 7 mm
- The contact bridge should push the contact surface down min. 3 mm ((D
D))
- Electrical terminations should be tight and secure.
- Contact bridge should be aligned to the middle of contact holes, not touching the hole edges.
min. 3 (D)
min. 1
0
(D)
1-2 (C)
1-2 (C)
