manualshive.com logo in svg

WITTUR Hydra Plus UD300, Инструкция по эксплуатации

Поделиться
Скачать
WITTUR Hydra Plus UD300 Скачать руководство пользователя страница 4

Subject to change without notice!

EN

HYDRA PLUS UD300 CAR DOOR

Code
Version

Code
Version
Date
Page

GM.2.002668.EN

B

3201.32.0397

B

04.02.2013

2.37

FOREWORD AND WARNINGS
SUGGESTIONS

W

WA

AR

RN

NIIN

NG

GS

S

- W

WIITTTTU

UR

R  will not be held liable for any damage caused by tampering of the packing material by thirds.

- Before starting assembly, check that the product received corresponds to the order and to the packing list and that no

damage has occurred in transit.

- Within its policy of continual research, W

WIITTTTU

UR

R  reserves to make changes to its products without notice. The figures,

descriptions and data contained in this manual are intended as purely indicative and not binding.

- To ensure the safety of the product, avoid any alteration or tampering.
- W

WIITTTTU

UR

R  liability will be limited to the original components only.

- W

WIITTTTU

UR

R  product is intended for use in the lift sector only, therefore W

WIITTTTU

UR

R    liability shall be limited to such use.

- This product is intended for professional use. Any improper use, including for hobby or DIY, is prohibited.
- In order to prevent any injury to persons and damage to property, the handling, installation, adjustment and mainte-

nance must be carried out by suitably trained personnel, using appropriate clothing and equipment.

- Any masonry work connected with the correct installation of the product must be executed in a workmanlike manner

according to the applicable laws.

- The connection of the electric/electronic units to the local power supply must be executed in a workmanlike manner

according to the applicable laws.

- All metal parts supporting the electric/electronic units must be connected to an earth system in a workmanlike man-

ner according to the applicable laws.

- Before connecting the product to the power supply check that the product’s requirement corresponds with the power

supply available.

- Before starting any work on the electric/electronic components disconnect power from the system.
- W

WIITTTTU

UR

R  shall have no responsibility on the execution of masonry works or the connection of electric/electronic com-

ponents to the power supply.

-  W

WIITTTTU

UR

R  shall not be liable for damages/injury to property/persons caused by improper use of the emergency opening

devices.

S

SU

UG

GG

GEES

STTIIO

ON

NS

S

- Keep the material in the original packing, protected from bad weather and direct exposure to sun during the storage

period in order to avoid the accumulation of water/condensation inside the packing material.

- Never dispose of packing material in the environment.
- Once dismantled, the product should be conveniently disposed as provided for by the local laws; never  dispose of in

the environment.

- Whenever possible, re-cycling is preferable to disposal in dump sites.
- Before re-cycling check the nature of the various materials and re-cycle in the appropriate way.

Congratulations on choosing a W

WIITTTTU

UR

R  product!

Before starting the installation of this product, read the information contained in this document.
Before installation work begins, it is in your own interests to clarify what structural and spatial conditions are available for
installation work, so that you can see which installation procedures should/must be carried out. Therefore it is recommend-
ed that all circumstances be taken into consideration, and to mentally plan the installation sequence before any rash or badly
planned work is carried out. Check the goods or parts for correct and full delivery upon receipt.
You will find important warnings on how to assemble and maintain your W

WIITTTTU

UR

R  product in good operating conditions and

to get the maximum of your investment.
You will also find important information concerning the product care and maintenance which are an important factor to
ensure safety at all times.
W

WIITTTTU

UR

R  has long been involved in research aimed at reducing noise level and in design that takes into due consideration the

product quality and the conservation of environment.
This document is an integral part of the supply and must be available in the lift power room at all times.
All products are provided with identification type label and in case with certification marks in accordance with the current
rules.
In case of need concerning the product, the identification data on the label must be always communicated to us.
We hope you will get full satisfaction from this W

WIITTTTU

UR

R  product. Yours faithfully.

W

WIITTTTU

UR

R

Содержание Hydra Plus UD300








































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды