1.2
Liability and guarantee
This instruction handbook is written for people
who are familiar with lift servicing and installa-
tion. Sufficient knowledge of lifts is essential.
WITTUR does not take responsibility for damage
caused by improper handling, or for damage
caused as a result of actions other than those stat-
ed in these operating instructions.
The WITTUR guarantee may be voided if parts
other than those described in these instructions
are installed.
Unless stated otherwise, the following is not per-
missible due to technical safety reasons:
• The use of components other than those
installed
• Carrying out modifications, of any kind on the
safety gear
• Installing two different brake heads with dif-
ferent index numbers together
• Destruction of the seal
If the seal is shacked, the complete
set of safety gears has to be replaced.
• Combining different component types
• Installing progressive safety gears intended for
other employment than that stipulated
• Carrying out faulty or improper maintenance
or inspection checks
• Using unsuitable accessories, spare parts or
operating material which has neither been re-
leased by the WITTUR Company nor consists of
original WITTUR spare parts
1.3
Safety precautions
Installers and servicing personnel are fundamen-
tally responsible for their safety while working.
The monitoring and following of all valid safety
rules and legal conditions is required in order to
prevent personal injury and damage to materials
during installation, maintenance and repair work.
This refers especially to the corresponding accident
prevention rules.
Important safety advice and danger warnings are
emphasized with the following symbols:
General danger warning
High danger risk warning (i.e. crushing
edge, cutting edge etc.).
Risk of damage to machinery parts (i.e. due
to incorrect installation, or such like).
Important information sign
These operating instructions belong with the
whole installation and must be kept in a safe place
at all times (i.e. machine room).
The proper assembly and installation of WITTUR
safety gears requires correspondingly well trained
fitting engineers. The responsibility of training lies
with the company appointed to carry out the
work.
Änderungen vorbehalten!
Subject to change without notice!
© WITTUR – All rights reserved
Progressive Type Safety Gear
CSGB-01C
Operating instructions
Blatt/
sheet
PM.7.003609.EN.004
Datum/
date
14.07.2016
Stand/
version
Geprüft/
approved
WAT/MZE
A-02.05.2017
