Witt W5-450MF, Руководство пользователя

Страница: 66 / 86

65
Using the oven
Through your programmer you will be able to set the time of day, the minute minder, and use the semi and
fully automatic cooking functions. The programmer is vital to the working of your appliance, and reading
this section will make sure that you get the most out of your oven(s).
The programmer buttons
There are three buttons on this type of timer. The table below shows you what the symbols look like –
depending on what model you have – and what they do.
This is a 24 hour clock. Before you use your appliance for the first time, you must ensure that the time of day
is set.
•
Before the oven can be used the time of day must be set.
•
Use the selection buttons to choose function and
temperature.
The function selector can be turned both ways.
The temperature selector can only be turned clockwise.
•
The function can be changed during cooking as long as the
oven is used manually and not programmed.
•
You need to choose both a function and a temperature.
•
The oven light comes on when the function selector is
turned.
•
Temperature indicator shows that the oven is warming. It
turns off when the oven has reached the set temperature.
•
To turn off the oven – set both the function and temperature
selector on”0”.
Clock/programmer
Through the clock/programmer you have the following opportunities:
•
To set the time of day
•
Set cook time, Set end time, Set automatic programmer
•
Minute minder
The programmer buttons
There are three buttons on this type of timer. The table below shows you what the symbols look like –
depending on what model you have – and what they do.
Down / Minus
Used to decrease cook / end time, remove minutes to the minute minder and adjust the time of
day. Also used for selecting an alarm tone.
Up / Plus
Used to increase the cook / end time, add minutes to the minute minder and adjust the time of
day.
Mode
Used to select the functions available on the programmer.
Press once for minute minder. Press twice for cook time. Press three times for end time.
How to use these functions is explained later in this section.