1. OVERVIEW
[A000131] This Installation and Operating Manual is intended for profes-
sional fitters and product owners. It contains the essential information
to guarantee safe installation and use, as well as the information about
correct care and maintenance of the products. Before beginning in-
stallation, read the entire manual, follow its guidelines, and perform all
activities in the described order. The product and its separate elements
shall be installed in accordance with the manual. Follow the guidelines
for assembly and use to allow for correct assembly and to ensure a long
and reliable use.
[A000120] The Manual applies to several product model variants.
[B000203] The door is also referred to as the “product”.
[B000204] The control device is also referred to as the “drive unit”.
•
[A000132]
The product may be installed and adjusted
by a PROFESSIONAL INSTALLER only.
•
[C000445]
The electric drive unit or the controller can
only be installed and adjusted by a
PROFESSIONAL IN-
STALLER
who is competent in automation and mechanical
engineering equipment for residential use and must do the
installation and adjustments in accordance with the current
laws of the country of use.
•
[A000094]
The scope of activities a Professional In-
staller and the Owner can perform is described further
in this manual.
•
[A000104]
Failure to observe the safety regulations,
regulatory requirements, as well as instructions and
recommendations provided in this Installation and Op-
erating Manual voids all of the Manufacturer’s obligations
and guarantees.
[A000145] When the product is the result of the installation of parts sup-
plied by various manufacturers or suppliers, the installer is considered
to be the manufacturer of the installed product.
[A000152]
Making any modifications or changes to the
product accessories is strictly prohibited.
[A000122] The Manufacturer shall not be liable for any damage
or operating malfunctions caused by use of the product with equip-
ment from other suppliers. Such use also voids the warranty issued
by the Manufacturer.
2. STANDARD TERMS AND DEFINITIONS
Explanation of warning signs used in the Installation and Operat-
ing Manual:
Caution!
- this sign indicates that attention is required.
Information -
this sign indicates important contents.
Professional fitter -
a competent person or unit who offers product in-
stallation services, including their improvement, to third parties.
Owner -
a natural or legal person with the legal title authorising them
to dispose of the purchased product, and liable for its operation
and performance.
[B000213]
Door operating cycle
- a single instance of opening and
closing of the door.
3. DESCRIPTION OF SYMBOLS
[C000383] Do not stay, pass, run or drive
under the door when it is in motion. Be-
fore opening or closing, ensure that
no persons, and especially children or any
objects, are in the path of the moving ga-
rage door. No persons, objects or vehicles
are allowed to stay within the clearance
of the open door.
[C000384] Do not use the garage door
to lift any objects or people.
[C000385] Do not use the door
when inoperable.
[C000386] Follow the Operating and Main-
tenance manual to inspect and maintain
the door. Before commissioning the door
and during its use relubricate the rollers,
hinges, guards, springs and bearings.
[C000387] Close the wicket door and lock
it with the key before operating the ga-
rage door.
[C000388] Remove the protective film
from the door sheet metal skin immediate-
ly after installation.
[C000389] Do not remove or modify any
component of the garage door.
[C000390] Keep your hands and all ob-
jects clear from the working range of all
moving components of the door and the
door latch, lock and guides.
TABLE OF CONTENTS
1. Overview ....................................................................................................... 2
2. Standard terms and definitions ............................................................... 2
3. Description of symbols.............................................................................. 2
4. Description of design and technical data .............................................3
5. The range of environmental conditions, for which the door has
been designed .............................................................................................3
6. Applications and intended use ................................................................3
7. Restraints in door operation .....................................................................3
8. Safety guidelines .........................................................................................3
9. Environmental protection ..........................................................................3
10. Notes on operation .....................................................................................4
11. Operating instruction ..................................................................................4
11.1. Opening and closing ........................................................................4
12. Routine maintenance instructions .......................................................... 5
12.1. Activities which may be performed by the owner after
careful reading the instruction ..................................................... 5
12.2. Activities to be performed by a professional installer only .. 6
12.3. Drive unit adjustment ...................................................................... 6
12.4. Overload adjustment .......................................................................7
12.5. Anti-drop safety device ...................................................................7
12.6. Actions restricted to authorised service agents of the
manufacturer ......................................................................................7
12.7. Frequently asked questions...........................................................8
13. Report Book ................................................................................................. 9
2
IOiK/BS/UniPro/04/2020/ID-98589
Technical description
Operating and Maintenance Manual
– Sectional garage door UniPro
EN
