WISKA Floodlight 5000, Инструкция по эксплуатации

Страница: 4 / 24

Instruction manual Floodlight 5000 4
Ed. 2.01
– 12/2019
Article N
o
50108013001
2.2 Electrical voltage
Read this manual carefully. If applicable also consider the operating instructions of other
manufacturers.
Install Floodlight 5000 as described in this manual.
ATTENTION : Electrical connections and connection cables must comply with all relevant
regulations.
Observe the safety regulations for electricians: Before starting any installation or maintenance
work, disconnect the power supply, secure it from being switched on again, check that no voltage
is present, earth and short-circuit and cover adjacent live parts.
WARNING : Floodlights must not be installed outdoors in rainy weather due to the danger of
an e electric shock.
CAUTION : Observe the load limits of extension cables and sockets to avoid the risk of fire or
an electric shock.
WARNING : Never repair damaged power cables! This poses danger to life. Disconnect the
Floodlight from the mains and have it repaired.
All cables and accessories must be professionally installed to function reliably.
Consider the national and local installation requirements and classification rules. In some
countries, lighting may only be installed by registered installers.
Clamping screws in electrical connections must be tightened as specified by the manufacturer.
Observe the symbols for connecting the cables in accordance with national directives:
N = Neutral L = Phase = Earth LS = Live, switched.
2.3 These instructions apply to the following versions:
Floodlights 5000 1x40, 5000 2x40, 5000 3x40, 5000 4x40 with and without protective grille as well as
narrow, normal or wide beam versions.
2.4 Change history
Version Revision date Changes
1.0 11/2017 first edition
2.0 09/2019 product redesign
2.01 12/2019 certificate renewed, additional rubber damper (5000 4x40)
2.5 Original instructions
The German version of this document is the original manual.