WISKA Floodlight 5000, Инструкция по эксплуатации

Страница: 9 / 24

Instruction manual Floodlight 5000 9
Ed. 2.01
– 12/2019
Article N
o
50108013001
9.2 Preparation
Required tools Screwdriver, open-end wrench, ratchet
Mark the mounting position.
ATTENTION : Malfunctions due to constantly dripping water are possible.
Do not install floodlights under drip edges or rain gutters. Maintain a minimum distance of 30
cm from a drip edge.
Prepare mounting points for on-board
installation.
Version
5000 1x40
L1 = 300mm
L2 = 250mm*
L3 =160 mm
B = 405mm
Version
5000 2x40
5000 3x40
L1 = 300 mm
L2 = 160 mm
L3 = 70 mm
B = 434mm
Version
5000 4x40
L1 = 309 mm
L2 = 249 mm
H1 = 60 mm
H2 = 35 mm
B = 437mm
*use only together with a mobile railing bracket.
9.3 Installation
Required tools Screwdriver, open-end wrench, ratchet lever
CAUTION Floodlight is heavy!
Injuries and damage from falling down are possible.
Use lifting gear if applicable
and secure the floodlight using another person’s
help.
Mount the bracket on the mounting
points
and
screw tight
.
Fix the floodlight to the mount with at least two
screws.
Use two screws with the outer holes (L1) or three
screws with the oblong holes and inner hole (L2, C).
Fix the version 5000 4x40 with 6 screws and mount 2
rubber dampers between bracket and surface.
1
2
1
i
C
L3