Wisenet XNV-6083Z, Онлайн руководство пользователя

Страница: 70 / 108

Alarm I/O
The I/O port of a camera can be set either as an input or output port as desired.
After selecting it to be either an input or output port, you can set the details of each Alarm I/O.
When you complete the setting, click the [Apply] button at the bottom of the page.

Note
If you use all alarm ports as output, the [External] mode of [Day/Night] will be disabled. If it is already set to [External], it will be
changed to the [Auto] mode. You can select [Video & Audio]>[Camera setup]>[Day/Night] to check the External mode of
Day/Night.
Alarm I/O
Input device setup
Event action settings
After selecting a port number, decide whether to use the port as an input or output port.
After selecting input or output, click the [Apply] button.
If [Input] is selected, [Input device setup], [Event action settings], and [Event action
settings] can be set. If [Output] is selected, [Alarm output] can be set.
The number of supported alarm inputs/outputs may differ by camera.
Sets whether or not to use an alarm input device and the type to activate an alarm
event when an alarm input is given.
Input device setup
To use an alarm input device, select [Enable].
Type
Select the alarm input type.
N.O. (Normal Open): The alarm input sensor is open by default; when it is closed,
an alarm input event is created.
N.C. (Normal Close): The alarm input sensor is closed by default and when it is
open, an alarm input event is created.
Sets your camera's behavior when an alarm input event occurs.
FTP
To save an image on an FTP server when an alarm input event is created, select
[Enable]. Detailed settings for FTP can be done from [Event]>[FTP/E-mail].