Wisenet PRN-1600B2, Руководство пользователя

Страница: 61 / 129

English
_61
onVif Setup
You can set the details related to camera events registered with the ONVIF protocol.
Setup > event > onVif setup
●
No. : Select the channel to which the ONVIF camera is registered.
●
Camera event : It shows the list of all the events supported by a camera by using the ONVIF protocol.
●
NVR event : You can map the list of events supported by a camera to events that the Recorder can detect. There
is no default value. It only shows the value sent by a camera.
– Mobile push notification : When an event occurs, the event push notification will be displayed on the
connected smart phone.
– Monitor event : When an event occurs, the screen of the corresponding channel will be displayed by
switching to the live screen. When selecting event monitoring, set the alarm duration in consideration of
network conditions.
– Shutdown: When an event occurs, a pop-up window will appear. You can select < Shutdown > or
< cancel >.
– User coding: It can be selected when < manual trigger > is set. You can set the WISENET camera to
execute the SUNAPI command entered in < user coding > when an event occurs. Click < test > to test the
execution of the entered SUNAPI command.
￭
Event action will run only when all set event triggers occur. If only one of the multiple events set has occurred, the event action will not run.
￭
Set the event action only when necessary.
4. Click < oK > at the bottom of the setting window to register the event rule.
alarm input
You can set the operation of the alarm sensor.
￭
This function is not supported in some models.
Setup > event > alarm input
●
Type : Set the mode in which the alarm sensor will operate.
– Off : Alarm sensor is disabled. Alarm is not used.
– N.O. (Normal Open) : Sensor is opened. If the sensor is closed, it generates alarm.
– N.C. (Normal Close) : Sensor is closed. If the sensor is opened, it generates alarm.
●
Channel : You can set the channel to execute an event action when a signal is input to the selected alarm.
This is possible when <
alarm input(nVr) > trigger and event action are set up in the " event > event rule
setup " menu.
•
S
etup