Wisenet PNM-9322VQP, Руководство пользователя

Страница: 11 / 28

English _
11
!
INST
ALLA
TION & CONNECTION
installation & connection
INSTALLATION
J
`
This camera is waterproof and in compliance with the IP66 spec, but the jack connected to the external cable is not. You are
recommended to install this product below the edge of eaves to prevent the cable from being externally exposed.
Precautions before installation
Ensure you read out the following instructions before installing the camera:
~ Select an installation site that can hold at least 5 times the camera’s weight.
~ Stuck-in or peeled-off cables can cause damage to the product or a fire.
~
For safety purposes, keep anyone else away from the installation site.
And put aside personal belongings from the site, just in case.
~ If the product is installed with excessive force, it may cause damage to the camera due to malfunction.
Forcing assembly using non-compliant tools may damage the product.
~
Do not install or remove the lens module while the power is on.
Disassembling
With the Torx L wrench or screw bit, loosen the
fastening screws counter-clockwise and remove
the dome and window covers.
M
`
You do not have to completely remove the screws
from the covers.
`
Remove the dome cover only when installing the
Micro SD card for PTZ. In all other cases, do not
remove the dome cover.
`
Remove the window cover when installing the lens
module.
You do not have to remove the dome cover.
J ` Since the dome and window covers are transparent,
there is no safety cable. Please be careful not to drop
it.
Inserting a Micro SD card
1. Using the Torx L wrench or screw bit(Torx 20), remove
the dome cover and the micro SD card cover.
2. Insert a Micro SD card in the arrow direction shown in
the figure.
J
`
Before installing the camera, the Micro SD card should be
inserted while the power source and the body are separated.
`
Do not forcefully insert it in the reverse direction. It might
damage your Micro SD card and your product.
` When it rains or the humidity is high, insertion or ejection of a
Micro SD card is not recommended.
`
Disassembly of the product cover should be finished within 5
minutes, or there will be the risk of internal dew condensation.
`
Remove the dome cover when installing the Micro SD card for
PTZ.
Dome cover
Window cover
x3
x3