Wisenet HRX-1620, Быстрое руководство

Страница: 6 / 13

6
7 Camera Register
Registers the searched network cameras.
Select a camera to register from the searched camera list and click the <
Register > button.
Select a camera to register from the list and click the < Change IP > button.
After completing camera register, click < Next >.
8 Channel Setup
You can view the camera videos registered to each channel in split mode along with thumbnail information.
To change the camera video position, select a video and drag and drop it to the desired location.
Click the < Finish > button to complete the Install Wizard.
4 Camera ID/PW Setup
4-1.
Set a camera password in factory reset. The initial password for the camera must be entered.
4-2. If ID/PW is already set in the camera, register the ID/PW and click < Next >.
4-1
4-2
※
Click < > to view the basic guide for setting a password. Refer to the password setup rules.
※
When the password is in factory reset, it can be changed and managed in a batch.
※
Up to 3 sets of camera ID with password and password can be registered.
※
You cannot change the password for cameras registered with ONVIF and RTSP.
5 Date/Time Setup
Set the date, time, time zone, and DST, and then click the < Next > button.
6 Resolution Setup
To set the recommended resolution, click < Apply > followed by the < Next > button.