Wisenet HCB-7000A, Руководство пользователя

Страница: 30 / 38

30_ camera operation
camera operation
-
AUTO : The mode is switched
to ’Color‘ in a normal
environment, but switches
to ’B/W‘ mode when
ambient illumination
is low. To set up the
switching time for AUTO mode, press the Function Setup switch. You can
turn on or off the burst signal on B/W mode.
y
BURST MODE : Activate or deactivate the burst mode to maintain or remove
the color signal.
y
DURATION : This function is used to select the brightness of light where
switching occurs.
y DWELL TIME : You can select day/night switching delay time from.
 3s, 5s, 7s, 10s, 15s, 20s, 30s, 40s, 60s
M
`
If you set the AGC mode to off on the exposure menu, you cannot switch the day/night
mode to auto.
`
When a bright light source is in the screen or there are frequent brightness changes, if
you use the auto night/day mode, and set the switching time to short (3, 5 sec), a hunting
can be caused. In this situation, it is recommended to use the default setting (30 sec).
- EXTERN : Ground to the grounding terminal to allow automatic switching between
COLOR and B/W (Black/White).
- COLOR : The picture is always displayed in color.
- B/W : The picture is always displayed in black and white.
You can turn on or off the burst signal on B/W mode.
M
`
If the lens mounted in the camera is different from the one set in <LENS> of the
<EXPOSURE> menu, then the night/day mode may not operate normally.
y
PRIVACY:
Mask an area you want to
hide on the screen.
➊ MM
If the SPECIAL menu screen is
displayed, use the Function Setup
switch so that the arrow indicates
‘PRIVACY’.
➋
MM
Select a desired mode using the
Function Setup switch.
AUTO SETUP
▶
1.
BURST MODE ON
2. DURATION NORMAL
3.
DWELL TIME
30 SEC
4.
RETURN
PRIVACY AREA
▶
1. AREA AREA 1
2.
MODE OFF
3.
MASK COLOR GREEN
4. TRANSPARENCY OFF
5. V POSITION II
I
IIIIIIIIIIIIIIIIII
25
6. HEIGHT
IIIIIIII
I
IIIIIIIIIIII
50
7. H POSITION
I
IIIIIIIIIIIIIIIIIIII
10
8. WIDTH IIII
I
IIIIIIIIIIIIIIII
30
9.
RETURN