Wisenet HCB-7000A, Руководство пользователя

Страница: 14 / 38

14_ introduction
introduction
1
Function Setup switch
Display the menu on the screen and move the cursor to four directions to confi rm ststus or
after changing a selected item.
 Switching between AHD and CVBS modes: Press the SET button for more than
5 seconds.
2
Power LED : This lamp is lit when the camera is receiving power normally.
3
Video OUT Terminal :
Sends video signal and connects to the Video IN port of a AHD DVR.
4
Power input terminal : Connect the designated power supplies.
(HCB-7000PHA : High Voltage Type)
5
RS-485 Control Port : You can control SETUP MENU through this port by using external
controllers like a Remote controller that RS-485 Communication
is supported.
6
D & N Input Port : You can switch to Day & Night Mode by connecting an external signal
to this port.
7
MD Output Port :
Motion detection signals are output through this port.
8
GND
Num Name I/O Direction
1 RS-485+ I/O
2 RS-485- I/O
3 DN I
4 MD O
5 GND -

External I / O port configuration