Wisenet HCB-7000A, Руководство пользователя

Страница: 28 / 38

28_ camera operation
camera operation
SPECIAL
1. When the SETUP menu screen is
displayed, select ‘SPECIAL’ by using
the Function Setup switch so that the
arrow indicates ‘SPECIAL’.
2. Select a desired mode using the
Function Setup switch.
y
DISPLAY
➊ M
If the SPECIAL menu screen is
displayed, use the Function Setup
switch so that the arrow indicates
‘DISPLAY’.
➋
MM
Select a desired mode using the Function Setup switch.
- FONT COLOR : You can change the OSD font color. (White, Yellow, Green, Red, Blue)
- LANGUAGE : You can select the menu language according to your requirements.
- RETURN : Return to the SPECIAL menu.
y COMM ADJ (Communication Adjustment) :
This function sets up the camera
communication status when
controlling the camera through an
external control device.
➊ MM
If the SPECIAL menu screen is
displayed, use the Function Setup
switch so that the arrow indicates
‘COMM ADJ’.
➋
Select a desired mode using the
Function Setup switch.
- PROTOCOL : Select the communication SAMSUNG-T/PELCO-D/PELCO-P
- CAM ID : Determines the camera's identification number (between 0 and 255).
- DISP ID: Determines whether camera ID is displayed or not.
- BAUD RATE : You can select 2400/4800/9600/19200/38400 bps .
- UART MODE : You can select NONE, EVEN or ODD for the parity bits.
- RET PKT : Determines whether to send a command back to the controller device
when a communication control command is sent to the camera.
- COAX : You can select whether to use COAX communication.
- RETURN : Return to the SPECIAL menu.
MAIN SETUP
1. VIDEO FORMAT AHD
2. D-WDR OFF
3. WHITE BAL ATW
4. EXPOSURE
5. BACKLIGHT
OFF

6. SPECIAL
7. EXIT SAVE
COMM SETUP
▶
1. PROTOCOL SAMSUNG-T
2.
CAM ID
I
IIIIIIIIIIIIIIIIIIII
1
3. DISP ID OFF
4.
BAUD RATE 9600
5.
UART MODE
8-N-1
6. RET PKT ENABLE
7.
COAX ON
8.
RETURN