Wirepath Surveillance WPS-300-DVR, Инструкция по установке и эксплуатации

Страница: 25 / 111

25
WPS-300-DVR-9CH & 16CH Installation and Users Manual
5.6 SOFTWARE UPGRADE
This menu is available to Administrators only.
On occasion it may be necessary to update the DVR’s software to take advantage new features. Using the
commands below, follow the instructions provided with the upgrade file.
In the Menu display, use the buttons on the front panel of the DVR or remote control, and press ▲▼◄► to
select Software Upgrade. Alternatively use the mouse to select this icon from the main Menu.
To navigate and operate this menu:
• ▲▼◄►
Press these buttons on the front panel of the DVR or remote control to select an item. Alternatively
use the mouse to select an item.
• ESC
Press the ESC button on the front panel of the DVR or remote control to escape from this menu and
return to the main Menu display. Alternatively use the mouse to exit the sub menu by clicking on the
“X.” If the contents in this menu have been modified, a Save dialog box will be displayed requesting the
user to save the changes. Press ENTER on the front panel of the DVR or remote control to exit and save,
ESC to exit without saving. Another method to escape is to use the mouse to “right-click,” and exit the
sub menu.
• BACKUP DEVICE
Use the front panel of the DVR or the remote control to press ENTER to connect to an attached backup
device. Alternatively use the mouse to select Backup Device.
• UPGRADE FILE
Select the file and press ENTER to start the upgrade process using the highlighted file. A confirmation dialog
box will be displayed on the screen. Press ENTER to confirm system software upgrade.
Note : After the software is upgraded, the system will restart immediately. This process may take a few
moments. The split window display will be shown after restart and login will be required.