Configuration via Web Interface
2
017-
03
85
Changing the DTM address
1. Place the cursor inside a cell of the
Long Tag
column.
2. Change the device long tag as required. You may change the long tags of several devices at
once, if needed.
3. Close the DTM dialogs of the devices whose long tags are to be changed.
4. To apply the new DTM address(es) press
Update changed tags
.
The new DTM addresses are displayed in the project view of PACTware.
5.6.3
Set Device Address
The table in the
Set device address
window shows the WirelessHART devices in the network.
The device address is the device long tag stored in the device.
Figure 5.29
Additional Functions > Set device address
Changing the device address
1. Place the cursor inside a cell of the
Long Tag
column.
2. Change the device long tag as required. You may change the long tags of several devices at
once, if needed.
3. To apply the new DTM address(es) press
Update changed tags
.
The new DTM addresses are stored to the devices.
Note!
Additional functions > Set device address
is available only online, while the connection to
the WirelessHART gateway and the WirelessHART device(s) is active.
Note!
The
Long Tag
parameterized in the
Set Device Address
window must be identical with the
Long Tag
of the same device parameterized in the
Set DTM address
window. See chapter
Otherwise the DTM is not able to establish a connection to the device.
