WirelessHART WHA-GW-F2D2-0-A-Z2-ETH Скачать руководство пользователя

Страница: 66 / 127

017-

WHA-GW-F2D2-0-A*-Z2-ETH

Configuration via Web Interface

Editing the Instrument List

1. To read the

Operating Modes

list from the WirelessHART gateway using the web interface,

click

Refresh

. If using the DTM to configure the WirelessHART gateway, select the Wire-

lessHART gateway in the project tree and choose

Device > Load from device

. If using the

DTM to configure the WirelessHART gateway, you can also import the devices of the project

tree by clicking

Import Project Tree

(DTM).

2. To add a device, click into the last row of the instrument list and specify the device

parameters. Press

Enter

to confirm your entries.



You can also edit existing entries by clicking into the corresponding cells of the instrument

list.

3. To remove a device from the instrument list, click the X-sign at the end of the row. The

respective I/O card becomes vacant again.

4. To write the current instrument list to the WirelessHART gateway using the web interface,

click

Apply

. If using the DTM to configure the WirelessHART gateway, select the

WirelessHART gateway in the project tree and choose

Device > Store to device



Note that the consistency of the instrument list is not checked before it is applied.

To export the current instrument list to a CSV file, click

Export

(web interface) resp.

Export

CSV

(DTM).

To load the instrument list from a CSV file, click

Import

(web interface) resp.

Import CSV

(DTM).
For more information on the structure of the CSV file, see chapter 12.

5.5.2

Downstream Communication

The WirelessHART gateway offers a setup for downstream communication for data to be

communicated downstream to field devices for control applications. The follwoing 2 modes are

available:

On-Change Update Mode

By default, all MODBUS output variables are updated with an on-change procedure. That

means, each output status change caused by the MODBUS master is identified by the gateway

and inserted in a queue to be forwarded to the discrete field device as soon as possible.
The on-change mode is useful if you require to manage many discrete output devices without

frequently changing their output statuses. The on-change mode is based on the reliable

wireless transfer mode.

Note!

When editing the instrument list, incomplete entries are highlighted in red. These errors must

be corrected before you can apply the instrument list.



Warnings are highlighted in yellow.

Tip

If a WirelessHART gateway is replaced with a new one, we recommend that you use the

export/import functionality to transfer the settings from the old WirelessHART gateway to the

new one. Otherwise, the new WirelessHART gateway rebuilds the WirelessHART network from

scratch by default, which means that the virtual HART I/O structure in the instrument list and

the MODBUS addresses of the devices will differ from the positions and addresses that have

been defined in the old WirelessHART gateway.
Furthermore, if using the DTM to configure the WirelessHART gateway, you can prepare the

instrument list and the MODBUS mapping tables offline and export the configuration into a

CSV file. Once the WirelessHART gateway is available on site, you can import the prepared

configuration via the CSV file.

Содержание WHA-GW-F2D2-0-A-Z2-ETH
































































































































Результаты поиска

Содержание WHA-GW-F2D2-0-A-Z2-ETH

Отзывы:

Похожие инструкции для WHA-GW-F2D2-0-A-Z2-ETH

Бренды по названию

Популярные бренды

WirelessHART WHA-GW-F2D2-0-A-Z2-ETH, Руководство пользователя

Результаты поиска

Содержание WHA-GW-F2D2-0-A-Z2-ETH

Отзывы:

Похожие инструкции для WHA-GW-F2D2-0-A-Z2-ETH

Бренды по названию

Популярные бренды