WirelessHART WHA-GW-F2D2-0-A-Z2-ETH Скачать руководство пользователя страница 100

Страница: 100 / 127

017-

100

WHA-GW-F2D2-0-A*-Z2-ETH

Configuration via Device Type Manager (DTM) and PACTware

6.4

Online and Offline Parameterization (PACTware)

The concept of online and offline parameterization applies only to configuration via device type

manager (DTM) with PACTware.

■

Offline Parameterization

(not connected to device)

If there is no active connection to the device, you can edit and save the data that is stored

locally in PACTware. You can transfer the local data to the device, as soon as a connection

to the device has been established.

■

Online Parameterization

(connected to device)

If there is an active connection to the device, you can directly edit the data that is stored

on the device. Parameter changes are immediately stored on the device.

Offline Parameterization

1. Right-click the device in the PACTware project view.
2. Choose

Parameter > Offline Parameterization

The window containing the offline data record appears.

3. Modify a parameter by typing in a new value or choosing a new value from the drop-down

list.

4. To accept the new value, press

Enter

5. After all parameter changes have been made, save your project by choosing

File > Save

6. To write the new offline configuration to the device, right-click the device in the project view

and choose

Connect

A connection to the device is established.

7. Right-click the device again and choose

Store to device

The new configuration is stored in the device.

Note!

Data that is edited and stored on the device during online parameterization is

not

automatically

synchronized with the offline data in the PACTware project. If you change device parameters in

online mode, the data in PACTware differs from the data on the device. To make sure the data in

PACTware matches the data on the device after online parameterization, load the data from the

device into the PACTware project.

Содержание WHA-GW-F2D2-0-A-Z2-ETH
































































































































Результаты поиска

Содержание WHA-GW-F2D2-0-A-Z2-ETH

Отзывы:

WirelessHART WHA-GW-F2D2-0-A-Z2-ETH, Руководство пользователя, Страница: 100 / 127

Результаты поиска

Содержание WHA-GW-F2D2-0-A-Z2-ETH

Отзывы: