•
VoiceAlert
2
User Manual
This user manual describes the installation of
WirelessAlert’s®
cutting edge VA
2
Wireless Base Receiver.
Please read the content of this page carefully before continuing.
SID
Very Important: All WirelessAlert equipment installations require a Site Installation Document (SID) to be
completed by the client and agent / installer of the VA
2
system (please see the SID document included at the
end of this manual – Appendix 4).
The owner (client), and or WirelessAlert agent, must print a copy of the SID and sign off in relevant section
on completion of the installation.
The SID serves as a valuable record of equipment installed for warranty purposes and as a reference for any
future system maintenance / changes / technical support required.
Protocols for Installation of Electromagnetic Transmitter / Receiver Devices
The VA
2
wireless receiver system employs electromagnetic transmitter and receiver devices. The correct
installation protocols must be followed at all times to prevent possible interference with surrounding
electronic radio equipment.
Please do not attempt to modify the VA
2
in any way and or attempt to use the device outside of its stipulated
function as this can lead to critical failure of the VA
2
device and adjacent electronic radio equipment. In
particular, please follow the warnings listed below.
Warnings:
Always make use of a qualified electrician, and or installer of electronic equipment for all electrical wiring
work that may be required.
Always use appropriate safety measures to prevent short circuit damage, including inline fuses with batteries
and appropriate inline resistors when wiring alarm panel inputs.
All environmental safety hazard requirements (e.g. fire / explosion) that may apply when using high-powered
electronic equipment must be adhered to.
Always house batteries and other vulnerable electronic components inside suitable IP65 rated junction
boxes.
Never operate any Radio Frequency (RF) system outside of its stipulated power (RF range) ratings.
Do not unnecessarily trigger Radio Transmitting Systems leading to continuous transmission of radio signals.
Make sure to prevent any external (e.g. truck parked across detection area) and or internal factors (faulty
wiring or incorrect type of transmitter) that could lead to continuous triggering and transmission of radio
signals.
About WirelessAlert
At a moment of intruder crisis, accurate, pinpoint, trustworthy warnings delivered to the right people, at the
right moment, are critical.
WirelessAlert has developed a range of security and monitoring products dedicated to keeping
people
safe.
Of course, our systems are leaders in keeping valuables safe too, but it is our focus on ‘user friendliness’ that
sets us far ahead in terms of personal safety.
The key to an effective
early warning
system is its usability; the system must be easy to use and easy to ‘live
with’.
Why ‘Trust’ in equipment is critical
Your faith and ‘t
rust’
in your security system is critical;
If you
don’t trust
that it will detect a real threat, you will never relax, and what’s the point of a system that
doesn’t eliminate your stress?
If it false triggers for no reason, you will lose trust in its accuracy and will probably stop using it.
But, VA
2
offers you a reliable intruder detection device you will learn to trust fully.
Copyright InFocus Trading 111 cc, 2009
2
